EDGE 2

EDGE 2

    Industrial LTE-M/NB-IoT Edge Node

    • MQTT Protocol for Cloud Connectivity
    • Ready to Cloud for AWS and Azure
    • Multiple I/O to connect to a Wide Variety of Field Equipment
    • Over thousands data storage (16MB Log storage); Scheduled Uplink
    • Integrated 10 bit A/D Converter to convert Analog Signal to Digital Data
    • Serial port supports Modbus RTU Interoperability

     

    Datasheet (PDF)
    Category:

    Feature

    WAN & Uplink

    EDGE 2

    • Protocol: TCP, UDP, MQTT
    • Cloud: AWS, Azure and MQTT based cloud
    • Data Security: SSL TLS 1.2
    • Connection: By schedule plan
      (per Yearly/Monthly/Weekly/Daily/Hourly or per designated Minutes)
    • Data Upload: Multiple servers supported for redundancy,re-trial plan for interrupted connection

    Field Communication

    Modbus

    • Master for accessing attached Modbus RTU Slaves
      (Up to 8 Modbus devices supported)

    Data Logging

    • By schedule plan
      (per Yearly/Monthly/Weekly/Daily/Hourly or per designated Minutes)

    Administration

    Configuration

    • Windows Utility, Console CLI, USB-to-Serial console cable

    System

    • Backup & Restore, Reboot & Reset, Syslog, Upgrade

    A Plus Serve ตัวแทนจำหน่ายสินค้าและอุปกรณ์ คอมพิวเตอร์เกรดอุตสาหกรรม สินค้าคุณภาพ ผลิตจากประเทศญี่ปุ่นและไต้หวัน

    Specifications

    Wireless Interfaces

    EDGE 2
    • 1 x LTE Cat. M1/NB2 Module
    • 3GPP, Cat. M1/NB2 with PSM (*Power save mode) supported
    Data Transmission
    • Cat. M1: Max. 375Kbps (DL); Max. 375Kbps (UL)
    • Cat. NB2: Max. 32Kbps (DL); Max. 70Kbps (UL)
    Specification
    • Max. Output Power: 23dBm
    • Sensitivity: -107dBm@Cat M1, 1.4MHz Bandwidth, CE Mode A -113dBm@Cat NB2, CE Level 0

    I/O Interfaces

    Analog Input
    • 3 x AI ports (supports 0-10V/4-20mA)
    • Conversion: 10bit ADC
    • Input Range: 0-10V, or 4-20mA (Dual mode)
    • Resolution: 10mV, or 20uA (with 2-bit hard-wired divider involved)
    Digital Input
    • 2 x DI ports (Isolated, supports Pulse Counter, Dry Contact)
    Digital Output
    • 1 x DO port (Isolated, Non-Relayed Output, Maximum 24V/300mA)
    Wake-up Port
    • 1 x Internal Reed Switch (EDGE 2) and dedicated wake-up port reserved for device wake-up triggering
    RS-485
    • Support 8 sets Modbus RTU devices
    • Modbus/RTU read command FC 1,2,3,4 and write command FC 5,6 from MQTT or LoRaWAN

    I/O Connectors

    2 x M16 waterproof connectors with 2-hole cable gland for wiring the required ports to external sensors/meters

    Embedded Antennas

    EDGE 2 Series
    • 1 x Internal 2dBi Antenna

    Log Storage

    Data logging (EDGE 2)
    • 16MB Internal Storage

    Power

    4000mAh 3.6V Li-SOCL2 battery (Optional), or external 5-12VDC Power Input predefined by Jumper
    • Power Consumption:
    • ON: 1000mWH
    • Sleep: 0.3mWH
    • Sending: 11.25mW / per one time

    Mechanical

    Casing
    • Plastic (PC, UL-94V2)
    • IP65
    Dimension
    • 105 x 55 x 76.47mm (W x D x H); Enclosure only
    • 131.97 x 81 x 76.47mm (W x D x H); Including Cable Gland, Brackets
    Weight
    • 0.3Kg (0.66lbs)
    Installation
    • Bracket mounting

    Environment Limits

    Operating Temperature
    • -30 to 70°C (-22 to 158°F)
    Storage Temperature
    • -40 to 85°C (-40 to 185°F)
    Ambient Relative Humidity
    • 5% to 95% (non-condensing)

    Regulatory Approvals

    Safety
    • EN 60950-1
    Emissions/Immunity
    • CE/NCC/EAC

    A Plus Serve ตัวแทนจำหน่ายสินค้าและอุปกรณ์ คอมพิวเตอร์เกรดอุตสาหกรรม สินค้าคุณภาพ ผลิตจากประเทศญี่ปุ่นและไต้หวัน